Dropping Weight and Adding Visual Appeal to Your S550 with Anderson Composites

Mustang S550 owners are in a unique position; a huge aftermarket network, engines with incredible tunability and a long-standing tradition of performance excellence. Of course, even with endless engine, transmission, suspension and other types of modifications available there’s always other areas to improve upon. Namely, the body panels. Although modern cars arrive at the party with thin metal and fiberglass body work, there’s still plenty of room for dropping weight and increasing functionality.

Anderson Composites has been keeping busy cranking out well-crafted, lightweight and very durable carbon fiber body panels and components for the current Mustang since it launched in 2015. Everything from hoods, doors, side skirts, fenders and more are already in their growing catalog. However, they’ve recently announced three new options, with more to come.

Official Release:

2015 – 2020 MUSTANG SHELBY GT350 TYPE-GT5 DOUBLE SIDED CARBON FIBER HOOD

Type-GT5 double sided carbon fiber hood for 2015-2020 Ford Mustang Shelby GT350 and GT350R

*Fits Shelby GT350 and GT350R only
*Carbon fiber “skeleton” bonded to underside of carbon fiber hood – reduced weight
*Vacuum infused process with 3K, 2×2 twill carbon fiber cloth, gloss finish
*Included GT500 style hood vent, improved heat extraction for GT350
*Included removable fiberglass rain tray

*Hood mounts with OE hardware

*All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins – AeroCatch or Quic-Latch 

*Heat shield required 

*Anderson Composites does not suggest re-installing gas shocks/dampers/struts

*The use of a hood prop rod is highly recommended

*Hoods are hand crafted and weigh approximately 26 lbs. (stock hood weighs 31 lbs.)

*Please be sure to review our Terms and Conditions before placing your order.

Watch a hood installation video here

WARNING: California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

SKU: AC-HD15FDMU350-GT5-DS

2020 – 2021 SHELBY GT500 TYPE-TPW CARBON FIBER REAR WING

Type-TPW carbon fiber rear wing for 2020-2021 Ford Mustang Shelby GT500 and 2015-2020 Shelby GT350R models.
-Also fits 2015-2021 Ford Mustang coupe (requires drilling 6 holes, original spoiler holes may need to be filled)

*Mounts with OE style brackets and hardware
*Direct replacement for GT500 CFTP model rear wing
*Cord width measures 11-3/4″ at centerline
*Overall width: 62-3/8″
*Installed height: 5-5/8″ from front of lip to decklid with wing in high position, measured at centerline. 
*Does not fit convertible Mustang
*Hand crafted; approximate weight 10.8 lbs. (OE unit weighs 9.4 lbs.)
*Wing has small hole on underside for condensation drainage
*Track tested at 130+ mph

*Please be sure to review our Terms and Conditions before placing your order.

WARNING: California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

SKU: AC-RS20FDMU500-TPW

2020 – 2021 FORD MUSTANG SHELBY GT500 TYPE-TPF CARBON FIBER FENDERS (PAIR)

Type-TPF carbon fiber track pack fenders for 2020-2021 Ford Mustang Shelby GT500

*MADE TO FIT 2020-2021 SHELBY GT500 (DOES NOT FIT THE MUSTANG GT, ECOBOOST, SHELBY GT350 OR GT350R)

*FENDER VENTS RELEASE HOT AIR FROM BRAKES, GREAT FOR TRACK DAYS

*REQUIRES FENDER LINERS TO BE TRIMMED TO BE FUNCTIONAL

*Each fender weighs approximately 5.05 lbs,, (OE fender weighs 10.8 lbs.)

*Vacuum infused process with 3K, 2×2 twill carbon fiber cloth, gloss finish

*MOUNTING TABS MAY REQUIRE MODIFICATIONS FOR CORRECT FITMENT; MINOR ADJUSTMENTS MAY BE   NECESSARY AS PART OF THE NORMAL INSTALLATION PROCESS

*For the best possible fitment, we recommend having an expert install your product(s) – someone who has experience working with carbon fiber. Although some body shops have been in business for many years, they may not have sufficient experience in installing carbon fiber or fiberglass components. Make sure that your installer is familiar with these products.

*PLEASE BE SURE TO REVIEW OUR TERMS AND CONDITIONS BEFORE PLACING YOUR ORDER.

WARNING: California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

SKU: AC-FF20FDMU500-TPF

Share this post


 cheap jerseys